How To Make Flared Jeans Shorter

Download Article

Download Commodity

Found the perfect fitting pair of jeans, only aren't addicted of the ankle-hugging await? Whether you want to catechumen direct leg jeans to accommodate boots or brand a fashionable pair of bell bottoms, putting your sewing skills to work will allow you to widen the bottom of your pants and make them uniquely yours at the same time.

Steps

1. 1

   Determine how wide you want the bong to be and how far upwards the leg you lot want information technology to begin. To work well, the opening should not extend whatsoever farther upwardly than i inch below the knee.

2. 2

   Cull your insert material.

   • Effort to keep your insert fabric close to the weight of the pants cloth. Denim with denim, twill with twill, etc.
   • Choose a patterned fabric, an alternating color, or pigment or embroider on your insert for dissimilarity. Y'all might besides friction match the color and weight closely for a more a subtle version.

   Advertisement

3. 3

   Commencement at the lesser of the leg on each side, using a seam ripper to open the seam to your desired length. Yous volition sew together the meridian of these slits closed (then that it doesn't tear anymore) later, when y'all add the insert (known every bit a 'gusset').

4. 4

   Use the seam ripper to open up the hem of the leg several inches on each side of the slit. You will run up this back into place subsequently when y'all hem the edge of the gusset.

5. v

   Measure your openings.

6. vi

   Transfer measurement to gusset cloth.

7. 7

   Fold two pieces of your gusset fabric in half, 1 over the other, and marker your cutting line diagonally on the incorrect side of the material.

   • Be certain the diagonal cutting is slightly longer than your slit length.
   • When measuring where the bottom cutting should brainstorm, keep in mind that you lot are cutting twice the width that y'all are looking at because of the fold in your textile (e.k. 4.5 inches will open to 9 inches).
   • The reason for doing 2 pieces at once is to ensure that your gussets lucifer in size and shape.

8. 8

   Cut both sides of your triangle gusset at the aforementioned time, keeping them symmetrical.

9. 9

   Turn the pants inside out.

10. x

    Pin the gusset edges to the raw edges of the slit legs, with right sides together.

11. eleven

    Stitch downwardly the edges of your pinned gusset. Information technology is best if you use the same corporeality of seam assart as was used to create the pants.

12. 12

    Press your seams away from the gusset.

13. thirteen

    Turn the pants right side out and meridian stitch the seams. This will reinforce both your long seam as well every bit the tiptop of the slit opening. You may want to backstitch several times over the pinnacle point of the slit to preclude unraveling afterwards.

    • As you top stitch, y'all volition need to hold the area being sewn flat while allowing the pant leg to bunch up around the presser foot.

14. 14

    Scroll the hems together and re-sew together the hem line.

15. xv

    Turn the pants right side out and repeat the procedure for the other leg.

16. 16

    Trim any loose threads. Wear them proudly!

Advertizement

Add New Question

• Question

  Do you cut both sides of the jeans?

  

  It is not necessary merely it looks really absurd if you cut both sides. Ripped jeans always look cooler if both the sides are ripped. Just measure out the size y'all want to cut out and use sharp scissors to cutting them.

Inquire a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertisement

Video

• Do on an sometime pair of pants first.

• Whenever possible, unravel the seam rather than cutting the fabric, so stitch the open seams flat on each side of the leg opening. Unraveling the seam volition make information technology much easier to sew the insert in.

• You lot tin can also reshape jeans right out of the washer and air dry i.eastward straighten them out, then stretch the bottoms to desired shape. Pulling legs straight down hard will lengthen them a bit too just be certain to reshape the bottom and air dry out. The stiffness will go away after a brusk while wearing.

Advertisement

• You may end upward ruining your pants. If so, just make them into shorts!

Advertizing

Things You'll Need

• Scissors
• Thread to match the weight and colour of the heaviest fabric
• Needle or sewing car
• Fabric for gusset
• Iron
• Straight pins

Almost This Article

Thanks to all authors for creating a folio that has been read 416,685 times.

Did this article help you lot?

Source: https://www.wikihow.com/Cut-Jeans-to-Make-a-Wider-Leg

Share this post